What are some attributes of a Safety Latch
First, in industrial products like a Crane Hook Safety Latch the use of steel provides the end user with the assurance of a strong and durable product. The Crane Hook Safety Latch will undoubtedly take some impacts with performing its job week after week, month after month, year after year. A steel Latch will be able to continue to function and provide a durable spring return closing mechanism across the open Throat of a Crane Hook. When properly sized it will protect those who work with a Crane Hook and around the area where the Hook may be transporting an item.
Where do I start to Size a Safety Latch
Second, it is very important to get the correct dimensions from the Hook where some one may be looking to place a new Crane Hook Safety Latch. The “Neck” dimension is usually the first piece of information needed to obtain for the inspecting Distributor Salesman. Then inspecting Salesman will need to determine the “Throat” opening dimension. Third, it is important to distinguish the Neck dimension as being the Circumference of the Neck or the Diameter of the Neck. The Circumference is the dimension obtained by placing a tape measure all the way around the Neck of the Hook, where one intends to place the Crane Hook Safety Latch. The Diameter is the distance from one side to the other and may be obtained by placing a ruler or tape measure in front of the Hook Neck. It requires the person taking the measurement to be precise. So if some one intends to get a measurement, they should not rush the process and if possible, can ask another person to view the measurement and verify the size determined.
What type of Hook do I have
The Fourth thing we need to be concerned about is the configuration of the Hook we have. Is it a Single sided Hook or a Double sided Hook, commonly referred to as a ” Sister Hook “. This should be recorded on your RFQ (Request for Quotation) in the body of the description. The information will allow the person sizing and quoting the Crane Hook Safety Latch to select the proper components from the beginning while doing his or her proposal. The Fifth item you need to know is the width of the Hook. Is this a standard Hook width like those commonly seen on the manufacturing floor of facilities around the nation and the world. Or are we describing a larger more massive Hook with a wide base area. Many Hooks have been designed to hold ladles or buckets. These hooks require a larger width Gate to insure that the item the Hook is holding does not come off. Designs can come with a number of features; one important feature to ask for is Finger Lugs. This feature allows the operator to push open the Crane Hook Safety Latch while keeping his or her fingers away from the sling or harness on the Hook or pressing against the Safety Latch while removal or loading. Your Crane Hook Safety Latch Distributor can supply you with more information and help you obtain the design best suited to your specific need.